
Drainage renovation
Existing drain repositioned for a new layout, re-graded to correct falls and tested before backfill.

Existing drain repositioned for a new layout, re-graded to correct falls and tested before backfill.

Internal sewer points relocated to suit the new layout, with the boundary trap connection completed.

Mains brought down from 700 kPa to a safe 500 kPa to stop long-term wear on pipes, taps and appliances. Exact suburb was not tagged on the source post.

Renovation rough-in with a sewer extension and a hot and cold outdoor mixing tap installed. Exact suburb was not tagged on the source post.

Rainwater pump, instantaneous hot water system and RPZ valve installed, tested and commissioned.

New electric hot water service supplied and installed, connections lagged and the unit commissioned.

Full roof package on an extension, with sheet roofing, custom flashings and finished cappings.

Sink, tap and waste installed into an existing kitchen.

Emergency call-out after a tap blew off at the water meter; new meter connection supplied and fitted.
Close read
Four things worth checking on any hot water and tempering setup, whoever installed it. If all four are right, whoever did the work was paying attention.

Next step
Send the suburb, what is happening, and a photo if you have one. You will get a straight answer about what it needs and what it costs.