Drainage and sewerDrain repositioning, sewer branches and boundary trap connections, set to the correct falls and tested before the trench is closed.
Hot water systemsStorage and instantaneous hot water supplied, installed and commissioned, with the tempering valve set and the old unit taken away.
Water pressure and valvesPressure testing and pressure limiting valves, because mains pressure well above 500 kPa quietly destroys everything downstream of it.
Gas fittingGas appliance installs and changeovers, leak tested and commissioned before anything is signed off. Instantaneous gas hot water is on the published job record.
Backflow preventionRPZ and backflow device installation, testing and commissioning, so the drinking water supply stays separated from everything else on site.
Renovation rough-inBathroom, laundry and kitchen rough-in and fit-off, coordinated so the wet areas are right before the walls close up.
Roof plumbingSheet roofing, box gutters, flashings and cappings, which is where most water gets into a building when it gets in at all.
Maintenance and emergenciesBurst pipes, failed taps and meter connections, plus the ordinary maintenance that stops those calls happening.
Next step
Not sure which one you need?
A message with the suburb, the problem and a photo. Most jobs can be narrowed down to one or two likely causes before anyone gets in a van.